Sale!
The Atlas LED 25 L/min is a high-capacity UV-C LED water steriliser designed to disinfect larger volumes of water than the 7 L/min and 15 L/min models. It uses UV-C LED technology to inactivate up to 99.9% of bacteria, viruses, and protozoa without adding chemicals or affecting the taste or odour of the water. The 25 L/min model includes several features: Treats up to 25 litres per minute of reverse osmosis (RO) water, or approximately 12–18 litres per minute of conventionally filtered water. Flow-activated operation: the UV LEDs switch on automatically when water flow reaches about 3 L/min and switch off when the flow stops, reducing energy use and extending LED life. 23 W power consumption. 3,000-hour UV LED lifespan. ¾-inch BSP threaded connections for higher-flow plumbing systems. Operates with water temperatures from 2°C to 65°C. Like all UV water sterilisers, it: Inactivates bacteria, viruses, and other microorganisms. Uses no chemicals and leaves no residual taste or odour. Does not remove sediment, chlorine, heavy metals, or dissolved chemicals. Requires reasonably clear water, so it is normally installed after a sediment filter or reverse osmosis system. If you’re choosing between the three models: 7 L/min – best for one drinking-water outlet. 15 L/min – suitable for a typical home or small commercial setup. 25 L/min – intended for larger homes with high simultaneous water demand or commercial environments where multiple outlets may be used at the same time.